Availability: | |
---|---|
Quantity: | |
Cold type cable accessories is the use of liquid silicone rubber injection of vulcanization molding in the factory, then through expansion, lined with plastic screw support form various parts of cable accessories, on-site installation, the pre expansion woolly, in processed at the ends of the cable or tapping out internal support plastic support, pressure on the cable insulation of cable accessories. Because it is at room temperature by elastic retraction force, rather than like heat shrinkage cable accessories to use fire to heat shrinkage, so it is commonly known as cold shrinkage cable accessories. 10kV full cold shrinkable power cable accessories are suitable for the connection of 3.6/6kV, 6/6kV, 6/10kV, 8.7/15kV single core/three core xLPE power cable
Test item | Parameters |
Wet Power Frequency Withstand Voltage Test (Outdoor) | 35kV/1min |
Dry Power Frequency Withstand Voltage Test (Indoor) | 39kV/5min |
Impact Pressure Test | 95kV1.2/50μs+10 times |
Partial Discharge Test | ≤10pc(1.73Uo) |
Type Table
Product Name | Item Code | Applicable Cable Section(mm²) | Product Name | Item Code | Applicable Cable Section(mm²) |
Single Core Indoor Termination | NLS-15/1.1 | 25-50 | Three Cores Indoor Termination | NLS-15/3.1 | 25-50 |
NLS-15/1.2 | 70-120 | NLS-15/3.2 | 70-120 | ||
NLS-15/1.3 | 150-240 | NLS-15/3.3 | 150-240 | ||
NLS-15/1.4 | 300-400 | NLS-15/3.4 | 300-400 | ||
NLS-15/1.5 | 500-630 | NLS-15/3.5 | 500-630 | ||
Single Core Outdoor Termination | WLS-15/1.1 | 25-50 | Three Cores Outdoor Termination | WLS-15/3.1 | 25-50 |
WLS-15/1.2 | 70-120 | WLS-15/3.2 | 70-120 | ||
WLS-15/1.3 | 150-240 | WLS-15/3.3 | 150-240 | ||
WLS-15/1.4 | 300-400 | WLS-15/3.4 | 300-400 | ||
WLS-15/1.5 | 500-630 | WLS-15/3.5 | 500-630 | ||
Single Core Straight Joint | JLS-15/1.1 | 25-50 | Three Cores Straight Joint | JLS-15/3.1 | 25-50 |
JLS-15/1.2 | 70-120 | JLS-15/3.2 | 70-120 | ||
JLS-15/1.3 | 150-240 | JLS-15/3.3 | 150-240 | ||
JLS-15/1.4 | 300-400 | JLS-15/3.4 | 300-400 | ||
JLS-15/1.5 | 500-630 | JLS-15/3.5 | 500-630 |
Cold type cable accessories is the use of liquid silicone rubber injection of vulcanization molding in the factory, then through expansion, lined with plastic screw support form various parts of cable accessories, on-site installation, the pre expansion woolly, in processed at the ends of the cable or tapping out internal support plastic support, pressure on the cable insulation of cable accessories. Because it is at room temperature by elastic retraction force, rather than like heat shrinkage cable accessories to use fire to heat shrinkage, so it is commonly known as cold shrinkage cable accessories. 10kV full cold shrinkable power cable accessories are suitable for the connection of 3.6/6kV, 6/6kV, 6/10kV, 8.7/15kV single core/three core xLPE power cable
Test item | Parameters |
Wet Power Frequency Withstand Voltage Test (Outdoor) | 35kV/1min |
Dry Power Frequency Withstand Voltage Test (Indoor) | 39kV/5min |
Impact Pressure Test | 95kV1.2/50μs+10 times |
Partial Discharge Test | ≤10pc(1.73Uo) |
Type Table
Product Name | Item Code | Applicable Cable Section(mm²) | Product Name | Item Code | Applicable Cable Section(mm²) |
Single Core Indoor Termination | NLS-15/1.1 | 25-50 | Three Cores Indoor Termination | NLS-15/3.1 | 25-50 |
NLS-15/1.2 | 70-120 | NLS-15/3.2 | 70-120 | ||
NLS-15/1.3 | 150-240 | NLS-15/3.3 | 150-240 | ||
NLS-15/1.4 | 300-400 | NLS-15/3.4 | 300-400 | ||
NLS-15/1.5 | 500-630 | NLS-15/3.5 | 500-630 | ||
Single Core Outdoor Termination | WLS-15/1.1 | 25-50 | Three Cores Outdoor Termination | WLS-15/3.1 | 25-50 |
WLS-15/1.2 | 70-120 | WLS-15/3.2 | 70-120 | ||
WLS-15/1.3 | 150-240 | WLS-15/3.3 | 150-240 | ||
WLS-15/1.4 | 300-400 | WLS-15/3.4 | 300-400 | ||
WLS-15/1.5 | 500-630 | WLS-15/3.5 | 500-630 | ||
Single Core Straight Joint | JLS-15/1.1 | 25-50 | Three Cores Straight Joint | JLS-15/3.1 | 25-50 |
JLS-15/1.2 | 70-120 | JLS-15/3.2 | 70-120 | ||
JLS-15/1.3 | 150-240 | JLS-15/3.3 | 150-240 | ||
JLS-15/1.4 | 300-400 | JLS-15/3.4 | 300-400 | ||
JLS-15/1.5 | 500-630 | JLS-15/3.5 | 500-630 |