Tel: +86-13587713206 / +86-577-61389776丨E-mail: nancy4046@hotmail.com
English
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
| Quantity: | |
|---|---|
1.Product Introduction
10kV and 24kV Elbow Type Cable Connector is fully-shield and shield and insulated plug-in termination for connecting underground cable to distribution power system of pad-mound transformer, surrounding power supply branch,cable branch box equipped with load bushings. Installed in T-II type cable head the the 200A outlet side, 200A bus-bar and American box single-pass (or double pass) bushing joints and load transfer joint, etc. 10kV and 24kV Elbow Type Cable Connector are fully insulation,fully shield ,fully sealing. The connection is very simple,with a reliable anti-loose device. The rod connector is equipped with arc extinguishing material,so it can be operated in a live state,but cannot cut off short circuit current. It can be used as load switch to switch off 200A current.
2.Product Parameter (Specification)
Technical Specification | |
Test Item | Parameters |
Wet power frequency voltage withstand | 12kV/1min |
Dry power frequency voltage withstand | 42kV/1min |
Power frequency withstand voltage for a long time | 35kV/4h |
Impulse voltage withstand | 95kV±10times |
Partial discharge | 13kV≤20pc |
All the parameters of the 10kV and 24kV Elbow Type Cable Connector are in conformity with the requirements and qualified.
1.Product Introduction
10kV and 24kV Elbow Type Cable Connector is fully-shield and shield and insulated plug-in termination for connecting underground cable to distribution power system of pad-mound transformer, surrounding power supply branch,cable branch box equipped with load bushings. Installed in T-II type cable head the the 200A outlet side, 200A bus-bar and American box single-pass (or double pass) bushing joints and load transfer joint, etc. 10kV and 24kV Elbow Type Cable Connector are fully insulation,fully shield ,fully sealing. The connection is very simple,with a reliable anti-loose device. The rod connector is equipped with arc extinguishing material,so it can be operated in a live state,but cannot cut off short circuit current. It can be used as load switch to switch off 200A current.
2.Product Parameter (Specification)
Technical Specification | |
Test Item | Parameters |
Wet power frequency voltage withstand | 12kV/1min |
Dry power frequency voltage withstand | 42kV/1min |
Power frequency withstand voltage for a long time | 35kV/4h |
Impulse voltage withstand | 95kV±10times |
Partial discharge | 13kV≤20pc |
All the parameters of the 10kV and 24kV Elbow Type Cable Connector are in conformity with the requirements and qualified.
