BX-40A/B Cable Half Conductor Stripping Pliers

Main purpose and scope of application

The BX-40A wire stripping pliers are mainly used to strip the main insulation layer at the end of cables with a diameter ranging from 20-40mm, and are usually used for stripping the insulation layer of 10KV cables. The BX-40B wire stripping pliers are suitable for stripping the semiconductor layer at the end of cables within the same size range.

Usage and operation steps

The basic steps for using BX-40A/B wire stripping pliers are as follows

:

1.Cut the wires that need to be peeled flat.

2.Adjust the length that needs to be peeled.

3.Connect the wire to the clamp of the wire stripping pliers.

4.Press the handle of the pliers firmly and peel off the outer layer of the wire.

5.If it is necessary to cut the wire, the cutting edge of the wire stripping pliers can be used for cutting